Frameless Shower Door Handles Now you need to attach the jambs on possibly side of the curb. Very first mark the holes wherever they will go, and then take away the jambs and everything. You will need to roll out the heavy gear now. Get a 3/16 ” bit for you drill that can cut into a smooth area like tile, and drill down away. You only need to get plastic material nail holders or walls holders that’ll be able to keep screws now. You sludge hammer them into the holes you have made, and you’re set to the screwing in.
You can now use caulk on the track, and ensure that it’s installed in place. Make sure that you have it mounted them the right way in. The particular weep holes need to be inside. Now that you have all the footwork in place, it’s time to set up the header, the rollers and the door. That’s to actually do the shower doorway installation. To install the header, take a side rail upward, screw it into the wall structure and then pick a header way up. It needs to go into the some other side rail. The other part of the header needs enter in the rail that’s fixed about the wall.